Instructions for using OBD Fusion with OBDCheck BLE+ on iOS

Video

OBDCheck BLE+ Tutorial with OBD Fusion

This video introduces the usage of the OBDCheck BLE+ with Car Scanner and OBD Fusion on iOS.
Watch on Youtube

Download

OBD Fusion

Click on the "Download" button bellow to go directly to the App Store for downloading.
Download

Step 1

Locate the OBD II Port in Your Car

Find the OBD II port in your vehicle. It is typically located under the dashboard near the driver's seat.

Step 2

Insert OBDCheck BLE+ into the OBD II Port

Plug the OBDCheck BLE+ device into your car's OBD II port. You should see a blue power indicator light up. If the light does not turn on, remove the OBDCheck BLE+ and reinsert it firmly into the OBD II port.

Step 3

Download OBD Fusion from the App Store

Search for "OBD Fusion" in the App Store and download the application.

Step 4

Launch OBD Fusion and Follow Initial Setup

Open the app. During the first run, you'll be guided through an initial connection setup. If you don't connect properly during this guide, proceed with the steps below to connect manually.

Step 5

Configure Bluetooth Settings

From the app's home screen, tap on "Settings." Then, go to "Preferences," and select "Communications." Under "Communication Type," choose "Bluetooth LE."

Step 6

Connect the App to Your Vehicle

Return to the home screen and tap "Connect" at the bottom of the page. The initial connection might take longer, so please be patient. If the connection fails, try reconnecting.

Step 7

Start Using the App's Features

Once connected, you can start exploring and utilizing the app's various features.