Instructions for using Car Scanner with OBDCheck BLE on iOS


OBDCheck BLE Tutorial with Car Scanner

This video introduces the usage of the OBDCheck BLE with Car Scanner and OBD Fusion on iOS.
Watch on Youtube


Car Scanner ELM OBD2

Click on the "Download" button bellow to go directly to the App Store for downloading.

Step 1

Locate the OBD II Port in Your Car

Find the OBD II port in your vehicle. It is typically located under the dashboard near the driver's seat.

Step 2

Insert OBDCheck BLE into the OBD II Port

Plug the OBDCheck BLE device into your car's OBD II port. You should see a blue power indicator light up. If the light does not turn on, remove the OBDCheck BLE and reinsert it firmly into the OBD II port.

Step 3

Download Car Scanner ELM OBD2 from the App Store

Search for "Car Scanner ELM OBD2" in the App Store and download the application.

Step 4

Launch Car Scanner ELM OBD2 and Complete Initial Setup

Open the Car Scanner ELM OBD2 app. If it's your first time opening the app, you will be prompted to complete some initial setup for the app and enter information about your vehicle.

Step 5

Configure the Adapter in the App

From the app's home screen, find and tap on "Settings." Within the settings menu, navigate to "Adapter OBD II ELM327." Select "Bluetooth LE (4.0+)" and then choose "VEEPEAK" from the "Device Name" options.

Step 6

Connect the App to OBDCheck BLE and Your Vehicle

Return to the app's home screen and tap the "Connect" button at the bottom of the screen. Wait for the app to establish a connection with the OBDCheck BLE and your vehicle. The first connection attempt may take longer, so please be patient. The app will show "ELM Connection" and "ECU Connection" when successfully connected. If either connection fails, tap "Disconnect" and then try "Connect" again.

Step 7

Start Using the App's Features

Once connected, you can begin exploring and using various features of the app to monitor and manage your vehicle's data.