Instructions for using OBD Fusion with OBDCheck VP01 on iOS
Download
OBD Fusion
Click on the "Download" button bellow to go directly to the App Store for downloading.
Download
Step 1
Locate the OBD II Port in Your Car
Find the OBD II port in your vehicle. It is typically located under the dashboard near the driver's seat.
Step 2
Insert OBDCheck VP01 into the OBD II Port
Plug the OBDCheck VP01 device into your car's OBD II port. If you cannot see a WiFi signal named "WiFi_OBDII" in the system's WiFi settings, remove the OBDCheck VP01 and reinsert it firmly into the OBD II port.
Step 3
Download OBD Fusion from the App Store
Search for "OBD Fusion" in the App Store and download the application.
Step 4
WiFi Connection
Connect to the WiFi signal named "WiFi_OBDII" in the system settings.
Step 5
Launch OBD Fusion and Complete Initial Setup
Open the app. During the first run, you'll be guided through an initial connection setup. If you don't connect properly during this guide, proceed with the steps below to connect manually.
Step 6
Configure App Settings
From the app's home screen, tap on "Settings." Then, go to "Preferences," and select "Communications." Under "Communication Type," choose "Wi-Fi" and click "OK" button at bottom on the screen.
Step 7
Connect the App to Your Vehicle
Return to the home screen and tap "Connect" at the bottom of the page.
If you haven't configured the vehicle profile, the app will require your vehicle information.
The initial connection might take longer, so please be patient. If the connection fails, try reconnecting.
Step 8
Start Using the App's Features
Once connected, you can start exploring and utilizing the app's various features.
